DIY Fall-ish Pumpkins // Pearl’s Blog Tour!

Today, I’m here with a fun DIY post! This post is my stop on Pearl’s blog tour! I’m so happy to be participating in this tour, spreading the word about Pearl’s new blog!

Pearl Christine is a Jesus-loving historical and contemporary fiction writer who writes to glorify and serve her King. When she’s not writing, you can find her lost in the woods with her camera, in the middle of another creative project, spending time with her seven siblings, running, or writing and decorating letters. You can find her at her website, pearlchristine.com, where she talks about all things creative.

Pearl’s blog posts consist of various topics related to DIY projects and inspo, photography, and writing; I really enjoy reading all of them!

With all of that being said, let’s dive into the DIY tutorial! πŸ˜ƒ


This project is very fall-ish: cute pumpkins, perfect for decor around the house! And, one of the best things about these pumpkins is that they are customizable! Let’s get into it!

Basics on the pumpkin design

These pumpkins are just made by sewing a rectangular piece of fabric into a cylinder, sewing up one end, stuffing it, and then creating wedges along the pumpkin with your thread on the pumpkin. All you have to do after this is sew/glue the stem on and tie off the thread!

Materials

These pumpkins can be made with a piece of fabric, a crocheted or knitted rectangle, or even a sock. If you’re using fabric, you can make it any size, but just make sure that one side is about 2.5 times as long as the other side. Same with the crochet/knit fabric: one side should be about 2.5 times as long as the shorter side.

You’ll also need a needle and thread (yarn needle and yarn if crocheting the pumpkin.) Stuffing, as well! The last thing you will need is something to use as a stem! I like the look of a crocheted i-cord, but you can also use a twig or cinnamon stick! If you’re going with any of the last two options, though, you’ll need a hot glue gun and hot glue.

Fabric pumpkin

If you love sewing, you’ll probably go with the plain fabric pumpkin! Firstly, cut out a piece of rectangular fabric. It can be any size, just be sure to make one side 2.5 times as long as the other side. It doesn’t have to be exact, but just try to get it pretty close.

Next, take your needle and thread, and (with the right sides of your fabric together) sew up the short sides of the rectangle together, making a cylinder shape. I used a running stitch. Shown in the photo below.

Sorry about the pictures. They’re not the best. I did take them during a rainy and cloudy day, so I understand the lighting’s not the best. Also, I didn’t have any fall themed fabric, so this butterfly one will have to do! πŸ˜„

Now, you’ll want to sew up one end of the cylinder, as shown in the below photo. I just used a running stitch, pulling tight to cinch up the end.

Now, turn the fabric right side out. Stuff, and then, sew up the other end, which will be the top of your pumpkin. Now, you’re going to take the needle and thread, and take it down to the bottom, coming back through the pumpkin to the top. This step is a bit difficult to explain, but I hope you understand. You’re creating wedges in your pumpkin, and you can sort of see what I’m talking about in the photo below.

Now, you can sew (or glue) your stem into the pumpkin, tie off your thread, and you’re done! ❀

Crochet pumpkin

Making a crochet pumpkin is fairly simple, basically the same as the fabric pumpkin. First, crochet a rectangular piece of fabric with one side about 2.5 times as long as the other. (Shown below.) You can use any stitch you like, but I would recommend alternating rows of single crochet and back loop single crochet because I like how the ridges look! Make sure it’s a tighter stitch to ensure no stuffing comes through.

Once you’re finished crocheting your rectangle, fasten off your yarn, leaving a long tail. Turn the right sides together, and sew the shorter ends together to make a cylinder. Sew up one end, like you did with the fabric pumpkin. This step is shown in the picture below.

When you’re done, turn the pumpkin right side out, stuff it, then begin to close off the top by weaving the yarn needle in and out of your rows. Photo below.

Now, you are going to make the “wedges” by taking the yarn across the pumpkin, and going horizontally up through the pumpkin, as shown in the photo below.

Add the stem, weave in your yarn’s ends, and you are done with your crochet pumpkin! You could also make a knit pumpkin by following these same instructions!

Sock pumpkin

Last, but not least, is the sock pumpkin! You can follow the same instructions for the other two pumpkins, the only difference being that the fabric is already in a cylindrical shape. Basically, you just get a sock, cut out part of it into a cylinder, and follow the same instructions from the other two pumpkins: sew up one end, turn the pumpkin right side out, stuff it, sew up the other end, make the wedges in the pumpkin, and secure the stem to the pumpkin!


That’s all for today’s post! I hope you liked it, and please go check out Pearl’s new blog! She’s also currently hosting a giveaway, which will end on the 21st. Go check out this post for more info and details. It looks really fun!

Be sure to go read the post on Rosie’s blog which will go live tomorrow, the next stop on this blog tour! Also, here is the complete schedule for the fun posts ahead!

I’d love to hear your thoughts on Pearl’s new blog and these DIY pumpkins in the comments! I hope you all have a blessed week, and I’ll be back on Thursday! ☺

~ Rebekah

Advertisement

6 thoughts on “DIY Fall-ish Pumpkins // Pearl’s Blog Tour!

  1. Pingback: Monthly Wrap-Up: October 2022 – Books and Hooks

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s